3DFilaLab

We believe in quality

ExcelFil™

voltivo-excelfil-high-grade-3d-printing-filamentPRODUCT OVERVIEW

Voltivo’s ExcelFil™ is a high grade, high-density 3D printing filament available in both PLA and ABS. ExcelFil™ is perfectly suited for and tested for a wide range of 3D printers. ExcelFil™ PLA and ABS filaments allow for easy extrusion due to their tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling, and a high tensile strength.
ExcelFil™ comes in a wide range of colors and in two diameters that fit many brands of printers. Voltivo ships ExcelFil™ on sturdy recyclable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture-free.

PRIMARY FEATURES AND BENEFITS

  • Diameter and Roundness accuracy better than 0.05mm
  • Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
  • Only A grade PLA/ABS raw plastic materials from USA and German suppliers, no scrap or recycled source material
  • Formulated for low printing temperature, thus allowing for less blobbing and stringing
  • Strong layer bonds – very rigid when cooled
  • Support website with tested print temperature guidelines and other support tools
  • 3.2mm spool hub diameter for lower friction
  • Arrives packaged in vacuum shrink wrap with a desiccant bag to ensure controlled humidity levels in transit

Specifications

Characteristic PLA ABS
Diameter Accuracy Nominal 1.75mm ±0.05mm Nominal 1.75mm ±0.05mm
Roundness Accuracy ±0.05mm ±0.05mm
Polymer Density 1.31g/cm³ 1.01g/cm³
Polymer Melt Point 210°C 260°C
Print Temperature Specific Temperatures in our Support Database Specific Temperatures in our Support Database
Spool Dimensions Outer Diameter: 200mm, Spool Hub Diameter: 32mm, Width: 60mm Outer Diameter: 200mm, Spool Hub Diameter: 32mm, Width: 60mm
Packaging Vacuum-sealed with a sachet of desiccant Vacuum-sealed with a sachet of desiccant
Ships in Rugged cardboard protective shipping box Rugged cardboard protective shipping box
Box Size 212mm x 212mm x 75mm
Material Net Weight 1kg ±0.05kg 1kg ±0.05kg
Gross Weight 1.35kg 1.35kg

ExcelFil™ – High grade 3D Printing Filament Print Support Database

Creating successful prints greatly depends on the correct print settings. Unfortunately 3D printing is still not as straightforward as desktop printing. A combination of factors influence successful printing results:

  • PLA and ABS material
  • Coloring (also called “masterbatch”)
  • The 3D model itself
  • The slicing software
  • The printer hardware

Based on the characterization parameters outlined above, we provide you with information for specific use cases to help reduce guess work and expensive experimentation. Each spool is labeled with a QR-Code which provides direct access to the specific ExcelFil™ 3D Printing Filament support database entry. The support site is also smartphone-ready for convenient quick lookup.

Downloads and other links

 

 

Leave a Reply

Your email address will not be published.